10-2-Johnson

Please READ all directions before starting the lab.

You will need Packet Tracer Version 8.1.1.022 or greater to open this file. If you can not open the file use the image below to complete this lab.

• Network IDs are already assigned.

• Some configuration have been done. You need to complete the rest in order to turn in Steps 5 and 6.

• Show all work in Packet Tracer. Create a text doc inside Packet Tracer, add to is as you work.

• You must upload your .pkt file before the end of class; before 2:15pm.

Using the Lab 10-1.pkt

Download Lab 10-1.pkt

file please complete the following:

1. Step 1: Assigned IP addresses and gateway addresses on Each PC.

2. Step 2: Assign IP Addresses on each Router port

3. Step 3: Configure Static Routes on routers 0, and 1, and RIP Routes to routers 2 and 3.

4. Step 4: Create to VLANS on Switch0, name them "Your First Name" and "Your Last Name". Assign port Fa0/1 to "Your First Name" and port Fa1/1 to "Your Last Name"

1. Step 5: At the end "Test Machine" should be able to ping PCs 1, 2 and 3. Screen capture command line ping (not PDUs) of "Test Machine" pinging PCs 1, 2, and 3.

1. Step 6: Screen Capture the VLAN database from Switch0